HI-Q TOOLS battery charger PM3500
HI-Q TOOLS battery charger PM3500_1
HI-Q TOOLS battery charger PM3500_2
HI-Q TOOLS battery charger PM3500_3
HI-Q TOOLS battery charger PM3500

HI-Q TOOLS battery charger PM3500

battery charger CAN BUS /12 V 1,1 A, for lead-acid and lithium PM3500

112.033.1
Available - delivery in 8-13 working days
€117.99
VAT included
Quantity

battery charger CAN BUS /12 V 3,5A, for lead-acid and lithium PM3500

Color: black

Material: 

CANBUS-enabled battery charger for 6- and 12-volt lead-acid batteries (WET, MF, AGM and Gel)ANDlithium LiFePo4 batteries.

You can use this charger to recharge the battery when needed or leave it on for extended periods of time (for example, over winter), thus extending battery life.

Particularly suitable for small and medium-size batteries in vintage cars, passengers cars, jet skis, lawnmowers, snowmobiles, etc.

  • With a charger so you can charge almost every starter battery on the market
  • Future-proof: even if you have a motorcycle with a (standard?) lithium battery, you can continue to use the charger
  • After switching on the mode button, it automatically detects whether a lithium, 6- or a 12-volt battery is connected
  • at 12 volts, it is still possible to choose whether a small battery with reduced maximum charging power (0.9A) or an AGM battery with a special charging cycle is connected as an alternative to normal charging
  • It checks the charging status of the battery and automatically starts the optimal charging process or the freshness-keeping mode
  • Built-in battery desulfator to restore used batteries. It can also reactivate undamaged, discharged 2-volt batteries
  • On most models with CANBUS, also suitable for connection to the original on-board plug socket (for example, for BMW, Ducati, Triumph and Harley-Davidson) - you may need a suitable adapter (see options)
  • From plugging it in and forgetting to use the vehicle - the charger does all there is in between
  • Includes removable crocodile clips which are attached to eyelets that can also be screwed directly to the battery terminals alternatively
  • This is particularly functional if the battery is difficult to reach for
  • The connection to the charger is made through an X-Connect plug - this also allows for the connection of further accessories (see options)
  • If the X-Connect socket is screwed firmly to the battery, it can be closed with a rubber cover
  • The housing can be connected via two holding eyelets, e.g., fixed to the wall (inside diameter 4 mm)
  • Extra long cables to operate independently of the socket position
  • Input voltage 100 V-240 V AC, 50-60 Hz, maximum consumption 60 watts
  • Charging current up to 3500 mA - suitable for batteries up to 120 Ah, freshness mode also for larger batteries
  • Degree of protection: IP65
Dimensions (approx.):
  • Length x width x height housing: 193 x 69 x 48 mm
  • Wide crocodile clips metal/plastic: 12/15 mm
  • Cable length device to outlet: 200 cm
  • Cable length device to X-Connect plug: 145 cm
  • Cable length Connect plug to battery connection grommets: 56 cm
  • Cable length Connect plug to tip crocodile clips: 64 cm
  • Ø eyelet: 6.5 mm (M6)
Weight: 715 g

Click here to leave a review

Data sheet

DELIVERY TIME
8-13 working days - See: SHIPPING TERMS
BRAND
hi-Q TOOLS

Specific References

6 other products in the same category: